Firmware Cross AT1G Bintang MT6577 4.1.2 100% Tested

Download stock rom Cross AT1G* | Tablet ini salah satu versi lama yang saya coba angkat kembali ke ranah google, dikarenakan firmware ini masih sangat langka sekali untuk tahun 2018 ini. Kenapa langka? Kemungkinan link yang bertebaran di google sudah tidak aktif lagi.

Sumber asal file flash cross AT1G bintang ini dari hasil read CM2 tadi malam, jadi lumayan buat menambah koleksi blog.

Flashingnya menggunakan sp flashtool versi 3xx saja sudah oke, jadi tidak perlu pake versi tinggi, terlebih saat muncul PMT changed, jadi sangat dianjurkan menggunakan versi flashtool lawas saja, selengkapnya Pmt Changed For The Rom It Must Be Downloaded Fix 100%


download firmware cross at1g bintang
cross at1g*

Chinese Miracle II  [MTK module] v 1.58

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Device boot not done
Check Drivers
Try again

Boot Error!

Operation Failed
Elapsed: 00:00:32
Reconnect Power/Cable!


Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Device boot not done
Check Drivers
Try again

Boot Error!

Operation Failed
Elapsed: 00:00:33
Reconnect Power/Cable!


Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 14 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6575
BB_CPU_NME : [MediaTek] MT6575|MT6577_S00
BB_CPU_EXT : 0xCB00 , 0x8B00 , 0xE201
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x84
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 09G40
[eMMC] : FLASH_CID : 110100303034473930104F96A6BA2005
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0x1BE2DB757546EACE4C5E79255EA2F0DC
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : alps
ProdName  : md706
ProdModel : CROSS AT1G*
Device    : md706
AndroidVer: 4.1.2
MTKxCPU   : MT6577
MTKxPRJ   : ALPS.JB.MP.V1.22

[Read Ok] : preloader_md706.bin
[Read Ok] : DSP_BL
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6577 / V1.0.0 / md706 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 657 MiB
Scatter saved to : C:\Users\Windows\Documents\@@@Firmware CM2\cross at1g bintang\MT6577__alps__CROSS_AT1G__md706__4.1.2__ALPS.JB.MP.V1.22\

All done!

Done!
Elapsed: 00:07:27
Reconnect Power/Cable!


Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Device boot not done
Check Drivers
Try again

Boot Error!

Operation Failed
Elapsed: 00:00:29
Reconnect Power/Cable!


Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6575
BB_CPU_NME : [MediaTek] MT6575|MT6577_S00
BB_CPU_EXT : 0xCB00 , 0x8B00 , 0xE201
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x84
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 09G40
[eMMC] : FLASH_CID : 110100303034473930104F96A6BA2005
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0x1BE2DB757546EACE4C5E79255EA2F0DC
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : alps
ProdName  : md706
ProdModel : EVERCOSS AT1G
Device    : md706
AndroidVer: 4.1.2
MTKxCPU   : MT6577
MTKxPRJ   : ALPS.JB.MP.V1.22

[Read Ok] : preloader_md706.bin
[Read Ok] : DSP_BL
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6577 / V1.0.0 / md706 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 660 MiB
Scatter saved to : C:\Users\Windows\Documents\@@@Firmware CM2\ori bcup\MT6577__alps__EVERCOSS_AT1G__md706__4.1.2__ALPS.JB.MP.V1.22\

All done!

Done!
Elapsed: 00:07:30
Reconnect Power/Cable!

Firmware Cross AT1G Bintang 
Mahar Pulsa 10.000,- ke nomor 0852 61020 345
Silakan konfirmasi password via SMS/WA

Khusus pengguna selain telkomsel,wajib via WA
karena balasan SMS biasanya pending sampe 5 menit

Or via paypal $2 (2 dollar)
WA : +6285261020345
Email : pariscell@gmail.com


Cross AT1G* file flash

Berlangganan update artikel terbaru via email:

1 Response to "Firmware Cross AT1G Bintang MT6577 4.1.2 100% Tested"

Semua posting tentang ANDROID rata-rata hasil tested, jika ada yang gagal, kemungkinan terjadi kesalahan pada caranya, firmwarenya atau perangkatnya.

Jagalah kesopanan dalam berkomentar, terima kasih atas kunjungannya.

Note: Only a member of this blog may post a comment.

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel